Icom D-STAR ID-4100A Manual page 23

8. Rotate [DIAL] to select the module letter. (Example: B)
9. Push [ï].
• Returns to the DR screen, and "Link to Reflector" and
"REF010BL" are displayed in "TO."
10. Hold down [PTT] to link to the reflector.
• Displays while transmitting.
Using the TX History
The TX History stores the up to 5 reflectors that your access
repeater linked before.
Example: Select the "REF010BL" in the TX History.
1. Hold down [DR] for 1 second to display the DR screen.
2. Select "TO," then push [ï].
• Displays the TO SELECT screen.
L On the DR screen, pushing [DR] toggles between "FROM"
and "TO."
3. Rotate [DIAL] to select "Reflector," then push [ï].
• Displays the REFLECTOR screen.
4. Select "Link to Reflector," then push [ï].
• Displays the "Link to Reflector" screen.
5. Select the reflector that you want to link to.
(Example: "REF010BL")
• Returns to the DR screen, and "Link to Reflector" and
"REF010BL" are displayed in "TO."
6. Hold down [PTT] to link to the reflector.
• Displays while transmitting.
D-STAR OPERATION
D-STAR GUIDE
22