To" (Destination) Setting - Icom D-STAR ID-4100A Manual

Dual band transceivers
Hide thumbs Also See for D-STAR ID-4100A:
Table of Contents

Advertisement

D-STAR OPERATION
■ "TO" (Destination) setting
Setting by rotating [DIAL]:
Rotate [DIAL] to select the repeater or Your Call Sign that
is displayed on the DR screen. (This operation is disabled
when "CQCQCQ" is set.)
To make a Local Area CQ call:
Set "CQCQCQ" in "TO"
(Destination).
To make a call to a specific
station:
Select the station call sign in the
Your Call Sign.
To select from RX History:
When you receive a call, the
repeater or caller station data
is stored in RX History. You can
select the destination from the
record.
To directly enter the
destination station call sign:
Directly enter the destination
station's call sign.
29
D-STAR GUIDE
TIP: After you receive the individual station or repeater's
signal, the call sign can be captured by holding down the
Call Sign Capture key ([RX>CS]), and you can quickly
and easily reply to a call.
To make a Gateway CQ call:
Select a repeater from the
repeater list, if you want to make
a Gateway call.
To make a call through a
reflector:
Select a reflector that is
connected to the repeater you
want to call through.
To select from TX History:
When you make a call, the
destination repeater or called
station data is stored in TX
History. You can select the
destination from the record.
To directly enter the
destination repeater call sign:
Directly enter the destination
repeater's call sign.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-star id-4100e

Table of Contents