Initial Settings; How To Select Language - Furuno 1815 Operator's Manual

1.5

Initial Settings

1.5.1

How to select language

Language selection at initial start up
At the first power on after installation or whenever the memory is cleared, the lan-
guage selection screen appears. Select your language as shown below. The default
language is English.
1. Press the (
appears followed by the language selection screen.
2. Operate the Cursorpad ( or ) to select the language of your choice then press
the ENTER key.
3. Push  on the Cursorpad to select [Yes] then press the ENTER key.
4. Press the MENU/ESC key to close the menu.
) key on the display unit to turn on the power. The splash screen
1. INSTALLATION
1-13