Waas Setup - Furuno 1815 Operator's Manual

6. GPS OPERATION
6.3

WAAS Setup

Geostationary satellites, the type used with WAAS, provide more accurate position
data when compared to GPS. These satellites can be tracked automatically or manu-
ally. Auto tracking automatically searches for the best geostationary satellite from your
current position.
1. Press the MENU/ESC key to open the menu.
2. Select [GPS], then press the ENTER key.
3. Select [WAAS], then press the ENTER key.
4. Select [Auto] or [Manual] then press the ENTER key. If you selected
[Auto], go to step 7. For [Manual], go to the next step.
5. Select [WAAS No], then press the ENTER key.
6. Select WAAS number, then press the ENTER key. (The setting range
is 120 - 158. Refer to the following table.)
7. Press the MENU/ESC key to close the menu.
Provider
WAAS
EGNOS
MSAS
6-2
Satellite type
Inmarsat-3-F4 (AOR-W)
Inmarsat-3-F3 (POR)
Intelsat Galaxy XV
TeleSat Anik F1R
Inmarsat-3-F2 (AOR-E)
Artemis
Inmarsat-3-F5 (IOR-W)
MTSAT-1R
MTSAT-2
Longitude Satellite No.
142°W 122
178°E 134
133°W 135
107.3°W 138
15.5°W 120
21.5°E 124
25°E 126
140°E 129
145°E 137