Maintenance, Troubleshooting - Furuno 1815 Operator's Manual

7. MAINTENANCE, TROUBLE-
SHOOTING
This chapter has information about maintenance and troubleshooting that the user
can follow to care for the equipment.
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel can work inside the
equipment.
Turn off the power before you service the
antenna unit. Post a warning sign near the
power switch indicating that the power
should be left off while you are servicing the
antenna unit.
Prevent the potential risk of being struck by the
rotating antenna and exposure to RF radiation
hazard.
When you work on the antenna unit, wear a
safety belt and hard hat.
Serious injury or death can result if a person
falls from the radar antenna mast.
NOTICE
Do not apply paint, anti-corrosive sealant or
contact spray to plastic parts or equipment
coating.
Those items contain products that can damage plastic
parts and equipment coating.
7-1