How To Assign A Preset Name To Tt Targets (B-Type Only); How To Activate The Preset Name Function; How To Setup Preset Names - Furuno FAR-2218-BB Operator's Manual

3.11 How to Assign a Preset Name to TT Targets (B-
type only)
You can assign a preset name to TT targets, which is displayed alongside the TT num-
ber in the target list.
3.11.1

How to activate the preset name function

1. Open the menu.
2. Select [5 TT•AIS].
3. Select [6 TT].
4. Select [5 TARGET NAME FUNCTION].
5. Select [ON], then press the ENTER MARK key.
3.11.2

How to setup preset names

1. Open the menu.
2. Select [5 TT•AIS].
3. Select [6 TT].
4. Select [6 TARGET NAME
PRESETS].
5. Select the appropriate
preset.
The software keyboard
appears.
6. Referring to section 1.5.2,
set the preset name. A
maximum of six characters may be used for the preset name.
7. Close the menu.
3. TARGET TRACKING (TT)
Select [0 NEXT] to
show page 2.
3-13