Related Commands - H3C S5830 Series Troubleshooting Manual

The output shows that a total of 251 packets match ACL 3000.
On GigabitEthernet 2/0/1 on Device C:
[H3C-GigabitEthernet2/0/1] display qos policy interface gigabitethernet 2/0/1
Interface: GigabitEthernet2/0/1
Direction: Inbound
Direction: Inbound
Policy: count
The output shows that a total of 50 packets match ACL 3000.
4. Compare the traffic statistics on the two interfaces. Packet loss or forwarding fault exists between
Device B and Device C.

Related commands

This section lists the commands that you might use for troubleshooting QoS and ACLs.
Command
display acl
display acl resource
display diagnostic-information
display qos policy interface
display qos policy user-defined
display traffic classifier user-defined
Operator: AND
Rule(s) : If-match ACL 3000
Behavior: count
Accounting Enable:
251 (Packets)
Classifier: count
Operator: AND
Rule(s) : If-match ACL 3000
Behavior: count
Accounting Enable:
50 (Packets)
Description
Displays configuration and match statistics for ACLs.
Displays ACL resource usage.
Displays or saves running status data for ACLs.
Displays information about the QoS policies applied
to specified interfaces.
Displays user-defined QoS policy configuration.
Displays user-defined classes.
44