Acd Auto-Available Timer Settings - Mitel 6800 Series Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide

ACD AUTO-AVAILABLE TIMER SETTINGS

Note: Applicable to the 6865i, 6867i, 6869i, and 6873i IP Phones only.
PARAMETER –
acd auto available
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
acd auto available timer
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
MAPPING KEY SETTINGS
This section provides the hard key settings you can use to enable and disable the Redial, Conf,
and Xfer keys on the IP phone.
PARAMETER –
redial disabled
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-216
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the use of the ACD Auto-Available Timer.
Boolean
0 (disabled)
0 (disabled)
1 (enabled)
acd auto available: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the length of time, in seconds, before the IP phone status
switches back to "available."
Integer
60 (seconds)
0 to 120 (seconds)
acd auto available timer: 60
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the Redial key on the IP phone. If this parameter
is set to 0, the key is active and can be pressed by the user. If this
parameter is set to 1, pressing the Redial key is ignored, and the
dialed number is not saved to the "Outgoing Redial List".
Boolean
0 (false)
0 (false), 1 (true)
redial disabled: 1