Mitel 6800 Series Administrator's Manual page 1037

P-ASSERTED IDENTITY (PAI)
PARAMETER –
sip pai
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
ROUTE HEADER IN SIP PACKET
PARAMETER –
sip remove route
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables whether PAI information is displayed on the
phone and specifies which URI field ("sip" or "tel") the phone should
use when displaying the PAI URI information
Integer
1
0 - 4
0 - Disabled: PAI information is ignored.
1 - Use sip URI only: (Default) The phone will use the URI
information contained in the "sip" URI field (if available) and
ignore the information contained in the "tel" URI field (if
available).
2 - sip URI preferred: The phone will use the URI information
contained in the "sip" URI field. If the "sip" URI field is
unavailable, the phone will use the URI information contained in
the "tel" URI field.
3 - Use tel URI only: The phone will use the URI information
contained in the "tel" URI field (if available) and ignore the
information contained in the "sip" URI field (if available).
4 - tel URI preferred: The phone will use the URI information
contained in the "tel" URI field. If the "tel" URI field is unavailable,
the phone will use the URI information contained in the "sip" URI
field.
Note: The default value (i.e. "1") will be enforced if this parameter is
defined with any unsupported value.
sip pai: 3
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables and disables the addition of the Route header in a SIP
packet. Enable this parameter for outbound proxies that do not
support Route headers.
Note: When enabled this will break all support for SIP routing, so if
some other device in the network attempts to add itself to the route
it will fail.
Boolean
0
0 (disable - adds the Route header to the packet)
1 (enable - removes the Route header from the packet)
sip remove route: 1
Advanced Operational Parameters
A-295