Mitel 6800 Series Administrator's Manual page 862

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
PARAMETER –
sip amr wb codec mode set
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip out-of-band dtmf
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-120
CONFIGURATION FILES
startup.cfg, <model>.cfg <mac>.cfg
Specifies the list of mode sets supported and also the preferred
mode to use if multiple modes are supported by both sides.
Integer
0
0-8
0 (6.60 kbps)
1 (8.85 kbps)
2 (12.65 kbps)
3 (14.25 kbps)
4 (15.85 kbps)
5 (18.25 kbps)
6 (19.85 kbps)
7 (23.05 kbps)
8 (23.85 kbps)
sip amr wb codec mode set: 2,1,0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables out-of-band DTMF. Enabling this parameter
forces the IP phone to use out-of-band DTMF according to
RFC2833.
Note: See "Out-of-Band DTMF and DTMF Method
DTMF behavior information when this parameter is used in
conjunction with the "sip dtmf method" parameter.
Boolean
1
0 - Disable
1 - Enable
sip out-of-band dtmf: 0
on page 4-91" for