Mitel 6800 Series Administrator's Manual page 496

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
or
Click on Operation->Expansion Module.
2. Click Save Settings to save your changes.
3. Click on Basic Settings->Preferences->General.
Note: If there is no CFWD key configured on the phone or it is removed, you can
still set the CFWD modes via the IP Phone UI at the path Options->Call Forward.
4. In the "Call Forward Key Mode" field, select a call forward mode to use on the phone.
Valid values are: Account, Phone, Custom. Default is Account.
•
Account
The account mode allows you to configure CFWD on a per account basis. Pressing a
configured CFWD key applies to the account in focus.
•
Phone
The Phone mode allows you to set the same CFWD configuration for all accounts (All,
Busy, and/or No Answer). When you configure the initial account, the phone applies
the configuration to all other accounts. (In the Mitel Web UI, only the account you
configured is enabled. All other accounts are grayed out but set to the same configu-
ration.) Using the Mitel Web UI, if you make changes to that initial account, the changes
apply to all accounts on the phone.
5-233