Henny Penny EVOLUTION ELITE EEE-142 Operator's Manual page 68

6-1. SPECIAL PROGRAm
mODE (Continued)
Oct. 2010
Program Code Change (SP-25) (Continued)
If satisfied with code, press and "*CODE
CHANGED*" shows in display.
If not satisfied with code, press and "*CANCEL"
shows in display, then reverts back to "SP-25" and
"CHANGE, MGR CODE? 1=YES". Now the above steps
can be repeated.
Usage Code Change (SP-26)
This allows the operator to change the reset usage code (factory
set at 1, 2, 3) to reset the usage amounts of each product. See
Review Usage step in Information Mode.
Press button and "SP-26 CHANGE USAGE
CODE? 1=YES" flashes in the display. Press and
"ENTER NEW CODE, P=DONE, I=QUIT show scrolls
through display. Press product buttons for new code.
If satisfied with code, press and "REPEAT NEW
CODE, P=DONE, I=QUIT, shows in display. Press same
code buttons.
If satisfied with code, press "*CODE CHANGED*"
shows in display.
If not satisfied with code, press and "*CANCEL"
shows in display, then reverts back to "SP-26" and
"CHANGE, USAGE CODE? 1=YES". Now the above
steps can be repeated.
Dispose Requires Code ? (SP-27)
Press button and "SP-27 DISPOSE REQUIRES
CODE ?" flashes in the left display. Press the or
buttons to choose YES or NO. If set to YES, code 1, 2, 3
must be entered to discard the oil from the vat, using the
Dispose Mode.
Longer Fill Time (SP-28)
Press button and "SP-28 LONGER FILLTIME
ENABLED?" flashes in the left display. Press the or
buttons to choose YES or NO.
Let User Exit Fill (SP-29)
Press button and "SP-29 LET USER EXIT FILL"
flashes in the left display. Press the or
buttons to choose YES or NO. If YES is chosen, the user
can exit the Express Filter
63
Model EEE-141, 142, 143, 144
fill operation.
TM