Henny Penny EVOLUTION ELITE EEE-142 Operator's Manual page 63

6-1. SPECIAL PROGRAm
mODE (Continued)
No. Cook
Product Cycles
Fish 2
French Fries 8
Chicken 4
Aug. 2011
Filter Tracking mode (SP-8)
Filter Tracking signals the operator when the oil needs filtering
by counting the number Cook Cycles between filters.
Press button and "SP-8" and "FILTER TRACKING
MODE" show in display. Use the
choose either "1.MIXED" filter tracking or "2.GLOBAL".
GLOBAL means all the products have the same number of
cook cycles between filters.
MIXED means each product may be set with different
Cycle
number of cook cycles between filters. The controls add
Count
the cycle counts (see example at left) and when the counts
1/2
equal 1 or greater, filtering is suggested. Ex: 1 load of fish,
1/8
2 loads of french fries, a load of chicken equals 1. 1/2 +
1/4
1/8+1/8+1/4=1.
mIXED
If MIXED is selected, press button and "SP-8A" and
"SUGGEST FILTER AT ..." shows in the left display, and a
value between 75% and 100% shows on the right display.
Press the
The lower the value, the sooner the control recommends to
filter. Ex: If set to 75%, the control suggest filtering after
3/4 of the programmed cook cycles is met, whereas at
100%, all the cook cycles must be completed before the
control suggest filtering.
Press and "SP-8B" and "LOCKOUT ENABLED?"
shows in the left display. Press the
choose YES or NO.
If set to YES, when controls suggest filtering, "FILTER
LOCKOUT"/"YOU *MUST* FILTER NOW", shows in
display; more cook cycles are refused until vat is filtered.
Press and "SP-8C" and "FILTER LOCKOUT AT..."
shows in left display and a value between 100% and 250%
shows on right display. Press
change this value. The lower the value, the sooner the
"lockout" occurs.
Ex: If set at 100%, "lockout" occurs when the cycle counts
reaches 1 or greater. Set at 200%, twice as many cycles are
counted before "lockout" occurs. See example above.
58
Model EEE-141, 142, 143, 144
and buttons to change this value.
and
and buttons to
and buttons to
buttons to