Quick Start - D-Link DSL-2640R User Manual

Section 3 – Configuration
This chapter is concerned with using your computer to configure the WAN connection. The following chapter describes the various windows used to
configure and monitor the Router including how to change IP settings and DHCP server setup.

Quick Start

To use the Quick Start Wizard, click the RUN WIZARD button and follow
the instructions in the pop-up window that appears.
The initial window summarizes the setup process. Click the Next button to
proceed. You may stop using the Quick Start Wizard at any time by
clicking the Exit button. If you exit the wizard you will return to the main
Quick Start window without saving any of the settings changed during the
process.
Quick Start Wizard – Opening Window
The first pop-up window of the Quick Start Wizard lists the basic steps in
the process. These steps are as follows:
1. Set your new password
2. Choose your time zone
3. Set your Internet connection
4. Re-start your ADSL router
Click Next to continue.
D-Link DSL-2640R User Manual
Quick Start
14