D-Link DSL-2640R User Manual page 20

Section 3 – Configuration
Quick Start Wizard - For Dynamic IP Address connections:
1. If you are instructed to change the VPI or VCI number, type in the
correct setting in the available entry fields. Most users will not need
to change these settings. The Internet connection cannot function if
these values are incorrect.
2. Select the specific Connection Type from the drop-down menu.
The available Dynamic IP Address connection and encapsulation
types are 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483
Routed IP LLC (IPOA), and 1483 Routed IP VC-Mux.
3. Click Next to go to the next pop-up window and complete the Quick
Start Wizard.
Quick Start Wizard - For Static IP Address connections:
1. If you are instructed to change the VPI or VCI number, type in the
correct setting in the available entry fields. Most users will not need
to change these settings. The Internet connection cannot function if
these values are incorrect.
2. Change the IP Address, Subnet Mask, and ISP Gateway as
instructed by your ISP.
3. Select the specific Connection Type from the drop-down menu.
The available Static IP Address connection and encapsulation
types are 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483
Routed IP LLC (IPoA), and 1483 Routed IP VC-Mux.
4. Click Next to go to the next window and complete the Quick Start
Wizard.
D-Link DSL-2640R User Manual 17