Interface Setup - D-Link DSL-2640R User Manual

Section 3 – Configuration

Interface Setup

To configure the Router's basic Internet and LAN configuration settings without running the Quick Start Wizard, click on the Interface Setup link in
the Wireless ADSL Router's opening page.
This window is also used to configure the Router for multiple virtual connections (Multiple PVCs).
Use the Virtual Circuit drop-down menu to display up to eight
configurable profiles for the Internet interface. If you do not intend to use
more than a single virtual connection (most users), you can use the
default setting (PVC0). If you are using multiple connections, use the
Virtual Circuit drop-down menu to access the Interface Setup window
for each desired connection. To change the settings for any profile in the
list, use the Virtual Circuit drop-down menu to display individual profiles
or click the PVCs Summary button to display the following summary of all
the profiles for the Internet interface.
D-Link DSL-2640R User Manual 19