Leds - D-Link DSL-2640R User Manual

Section 1 - Product Overview
Power
Steady green light indicates the unit is powered on.
This remains dark when power is off. A red colored
Power LED indicates system failure.
LAN
A solid green light indicates a valid link on
startup. This light will blink when there is activity
currently passing through the Ethernet port.
D-Link DSL-2640R User Manual
Hardware Overview

LEDs

WLAN
Steady green light indicates a
wireless connection. A blinking
green light indicates activity on
the Wireless LAN interface.
Internet
A solid green light indicates the WAN IP address from IPCP or
DHCP and DSL is up or a static IP address is configured and
PPP negotiation has been successfully completed. If the
indicator blinks green, this means the Router is active. If the
Router power is off, this remains dark. A solid red light indicates
there is no DHCP response, no PPPoE response, PPPoE
authentication has failed, and/or there is no IP.
DSL
A steady green light indicates a
valid ADSL connection. This will
light after the ADSL negotiation
process has been settled. A
blinking green light indicates
activity on the WAN (ADSL)
interface.
4