Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany 1.3 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered.
Page 5
▶ Do not attempt to charge or continue to use damaged batteries (e.g. batteries with cracks, broken parts, bent or pushed-in and/or pulled-out contacts). Service ▶ Have the appliance serviced by a qualified specialist using only genuine Hilti spare parts. The safety of the appliance can thus be maintained. English...
If the battery symbol does not appear in the display either the battery is not correctly inserted or the battery or the appliance is defective. Stop using the appliance and the battery and have them checked by Hilti Service. 3.3 Information shown in the display The AM frequency band has been selected as the audio source.
Indicates the treble settings. Indicates stereo playback. Stereo playback is activated automatically when signal reception is good enough. Indicates the memory slot of the station. Indicates the time. Symbols flash in setup mode. 3.4 Cradle for external devices Via Bluetooth or AUX, the appliance can play audio from external mobile devices such as mobiles/cellphones or tablet computers.
Note It is not possible to save settings unless the batteries are correctly installed. ▶ Insert the 2 AAA batteries supplied with the appliance into the battery compartment. 5.2 Connecting the appliance to the AC supply ▶ Connect the appliance to the AC supply. 5.3 Inserting and removing the battery 1.
5.4 Switching the appliance on / off ▶ Press the power button. 5.5 Setting the clock 1. Press the clock button. 2. Use the knob on the right to adjust the clock time. 3. Save the clock time by pressing the knob on the right briefly. 5.6 Establishing a Bluetooth connection Note If you are prompted for a code, enter the code 0000.
2. To pair the appliance manually for the first time, press and hold down the Bluetooth button (for about 2 seconds) until the Bluetooth symbol starts to flash. ◁ Select the Hilti Radio Charger on the external device while the Bluetooth symbol on the display is flashing.
1. Press the mode button. 2. Select the desired audio source. You can choose between AM, FM, AUX and Bluetooth. 5.9 Searching for and saving stations Note Quickly turn the knob a short distance to start the automatic station search. 1.
5.10 Positioning the antenna ▶ Swivel the antenna to the position at which reception is clearest. 5.11 Adjusting the volume 1. Turn the power button clockwise to increase the volume. 2. Turn the power button counterclockwise to reduce the volume. 5.12 Equalizer settings Note This allows you to make adjustments to the bass and treble settings.
2. Use the knob to select either bass or treble for adjustment. 3. Use the knob to change your settings. 5.13 Audio playback from an external device via AUX 1. Select the play mode (AUX or Bluetooth). 2. Press the start/pause button on your mobile device to start or pause audio playback. 3.
If the LEDs light up the Radio Charger might be defective. If the LEDs do not light up the battery is defective. ▶ Contact Hilti Service. 6.2 Appliance in battery-powered operation Malfunction Possible cause Action to be taken The appliance does not start.
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
10 Manufacturer’s warranty ▶ Please contact your local Hilti representative if you have questions about the warranty conditions. English Printed: 03.03.2017 | Doc-Nr: PUB / 5296538 / 000 / 01...