In these operating instructions, the designation “appli- Contents Page ance” refers to the C 7/24 and C 7/36-ACS chargers. 1. General information Location of identification data on the appliance 2. Description The type designation and serial number can be found on 3.
The charger is designed for charging Hilti batteries with Items supplied a nominal voltage of 7.2 – 36 volts (C 7/36-ACS charg- – C 7/24 standard charger er) or 7.2 – 24 volts (C 7/24 charger). – C 7/36-ACS top charger – Operating instructions Voltage Designation Battery type...
The appliance is designed to charge Hilti batteries with ● ance. a nominal voltage of 7.2 – 36 volts (C 7/36-ACS charg- er) or 7.2 – 24 volts (C 7/24 charger). 5.4.1 Electrical hazards Use the appliance to charge Hilti batteries listed in ●...
Insert the battery in the appropriate compartment or Corrosive liquids may leak from defective batteries. Avoid interface, depending on the type of Hilti battery to be contact with such liquids. charged. Please use the Hilti CA 7/36 adaptor when charging 7.2 Indicators...
If Never operate the appliance when the ventilation slots necessary, the appliance should be repaired by Hilti Ser- are blocked. Clean the ventilation slots carefully using vice. a dry brush. Do not permit foreign objects to enter the interior of the appliance.
Most of the materials from which Hilti appliances are manufactured can be recycled. The materials must be cor- rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old appliances for recycling.
11. EC declaration of conformity (original) Designation: Battery charger Type: C 7/24 or C 7/36-ACS Year of design: 2003 We declare, on our sole responsibility, that this product complies with the following standards or standardisation documents: 2006/95/EG, 2004/108/EG, EN 60335-1, EN 60335-2-29, EN ISO 12100, 2011/65/EU.