Preparation before Use
DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below to specify the DHCP setting.
2-18
Downloaded From ManualsPrinter.com Manuals
Login User Name:
********************
Login Password:
[ Menu
] [ Login
Sys. Menu/Count.: a b
1
Report
2
Counter
3
System
*********************
[ Exit
Administrator only.
System:
1
Network Setting
*********************
2
I/F Block Set.
3
Security Level
[ Exit
1
Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
L b
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.
NOTE:
]
•
Refer to Character Entry Method on Appendix-5 for
details on entering characters.
•
If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left
Select key) to select the authentication destination.
2
In the Sys. Menu/Count. menu, press the
key to select [System], and then press the OK key.
]
IMPORTANT:
logged in using a user ID with administrator privileges.
If you have logged in using a user ID without
administrator privileges, the screen will display
Administrator only. and return to the standby screen.
3
In the System menu, press the
a b
[Network Setting].
]
To make the settings, you must have
or
OPERATION GUIDE
or
key to select