Kyocera FS-1028MFP Operation Manual page 259

When KPDL Is Selected for Emulation
When you use the KPDL emulation mode, set whether or not to output KPDL error reports. The default setting
is Off.
Use the procedure below to make the setting.
When KPDL(Auto) Is Selected for Emulation
If you use the KPDL(Auto) emulation mode, KPDL and another emulation mode can be automatically switched
according to the data (alternative emulation).
For alternative emulation, you can select one of the following printers. The default setting is PCL6.
• Line Printer
• IBM Proprinter
• DIABLO 630
• EPSON LQ-850
• PCL6
Also, as when you select [KPDL], set whether or not to output KPDL error reports. The default setting is Off.
Use the procedure below to make the setting.
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Emulation Set.:
5 PCL6
6
********************* KPDL
7
KPDL(Auto)
KPDL Error Rpt:
1 *Off
*********************
2
On
Emulation Set.:
5
PCL6
6 KPDL
7 KPDL(Auto)
*********************
1
In Emulation Set, press the
a b
[KPDL].
2
Press the OK key. KPDL Error Rpt appears.
a b
3
Press the
4
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
1
In Emulation Set, press the
a b
[KPDL(Auto)].
Default Setting (System Menu)
or key to select
or key to select [Off] or [On].
or key to select
8
8-71