Kyocera FS-1028MFP Operation Manual page 384

Management
Managing Accounts
This changes the registered account information or deletes the account.
Use the procedure below to manage accounts.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
11-18
Downloaded From ManualsPrinter.com Manuals
Sys. Menu/Count.:a b
4
User/Job Account
*********************
5
User Property
6
Common Settings
[ Exit
Login User Name
*******************
Login Password:
[ Menu ] [ Login
User/Job Account:a b
1
User Login Set.
2 Job Account.Set.
*********************
3 Unknown ID Job
[ Exit
Job Account.Set.:a b
4
Each Job Account
5
********************* Account. List
6 Default Setting
[ Exit
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account], and then press
the OK key.
]
3
If user login administration is disabled, the user
L b
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
]
NOTE:
If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left Select
key) to select the authentication destination.
4
In the User/Job Account menu, press the
key to select [Job Account. Set.].
]
5
Press the OK key. The Job Account. Set. menu
appears.
]
6
Press the or key to select [Account. List].
OPERATION GUIDE
or
or