❖ Note
You cannot charge the battery by connecting the
・
desktop holder to a PC.
Check the connecting direction to connect correctly.
・
Wrong connection may cause damage.
Attachment 37A is attached to the Desktop Holder
・
by default.
Attachment 37B only supports terminal covers with
・
"
(Compatible with genuine
純正卓上ホルダ対応
desktop holders)" mark (commercially available) and
the terminal can be charged on the Desktop Holder
with a compatible cover attached.
Charging with AC adapter
When using AC Adapter 04 (optional) for
charging, do the following procedures.
Opening/closing microUSB jack cover (P.24)
・
Notification LED
microUSB plug
AC adapter
Open the microUSB jack cover and
1
insert the microUSB plug of the AC
adapter horizontally into the
microUSB jack of the terminal with
the engraved side (B) facing up.
Unfold the power plug of the AC
2
adapter and insert it into an outlet.
Notification LED of the terminal turns
・
on (P.42).
When charging is complete,
3
remove the power plug of the AC
adapter from the power outlet.
Remove the microUSB plug of the
4
AC adapter evenly from the
terminal.
Close the microUSB jack cover,
5
firmly press it and make sure that
there are no gaps between the
terminal and cover.
❖ Note
Check the connecting direction to connect correctly.
・
Wrong connection may cause damage.
Charging with DC adapter
DC Adapter 04 (optional) supplies power
from a car cigarette lighter socket (12 V/24 V).
For details, refer to the DC Adapter 04
manual.
Before Using the Terminal
34