[Start the software update]
2
For activating from Software update
・
notice screen, display the Software
update notice screen
After a message for rewriting start
3
appears, rewriting starts
automatically in approximately 10
seconds.
Tap [OK] to start rewriting
・
automatically.
While updating the software, all key
・
operations become disabled. Also,
updating cannot be canceled.
When the software update is complete,
・
the terminal restarts and the Home
screen is displayed.
❖ Information
If software update is not needed, "No update is
・
needed. " is displayed.
Post-update display
■
appears on the status bar. Drag the
status bar downwards
notification, a message indicating that
software update is complete appears.
u
[Yes].
u
[Start update].
u
Tap the
Reserving software update
You can preset time to update the software if
you want to specify another time for
installing the update file.
Display the Software update
1
notice screen
u
Set a time
[Set].
2
When the reserved time is reached
■
When the reserved time is reached, "Ready
for update. Please refrain from starting other
application." appears, then rewriting starts
automatically in approximately 10 seconds.
❖ Information
While updating the software, all key operations
・
become disabled. Also, updating cannot be
canceled.
If software update could not be started at the preset
・
time, the software update will be performed at the
same time the following day.
While upgrading Android software, software update
・
is not executed even when the set time arrives.
When an alarm etc. is set at the same time as the
・
reserved time, priority will be given to the software
update.
If SO-03F is turned OFF at the reserved time, the
・
software update starts at the same time as the
reserved time after the terminal is turned ON.
u
[Set Time].
Appendix/Index
205