Connecting To Other Devices - Sony Xperia Z2 SO-03F Instruction Manual

Docomo
Table of Contents

Advertisement

Connecting to other
devices
Connecting a TV
This terminal supports MHL connection. For
an HDMI compatible TV, use a commercially
available HDMI connector (MHL adapter) and
an HDMI cable etc. to connect to the
terminal.
Connect to a TV to activate TV Launcher and
display photos and videos on the TV screen.
Connect to TV using commercially
1
available MHL cable.
Activate TV launcher automatically. If TV
launcher does not activate
automatically,
status bar. Drag the status bar
u
downwards
activate TV launcher.
Switch the TV to MHL input mode.
2
Flick an icon left or right
3
application you want to use.
❖ Information
Removing the MHL cable from the terminal severs
connection, however, TV may remain to MHL input
mode or HDMI input mode. Follow the instructions
on the TV to switch to digital terrestrial television
mode, etc.
,
appears on the
Tap [TV launcher] to
u
Select
When MHL is connected, radio wave condition may
be affected according to your environment for the
usage.
When you do not use MHL connection, remove the
MHL cable or HDMI adapter and cancel MHL
connection. If the HDMI cable remains connected,
the battery may be consumed quickly.
The terminal does not support resolution 720 576p
(50Hz) for MHL output to TV.
You can operate the TV Launcher screen, the Home
screen or applications using a TV remote control if
connecting the following devices.
- MHL compatible TV supporting Remote Control
Protocol (RCP)
- HDMI compatible TV supporting Consumer
Electronic Control (CEC)
To connect to an HDMI compatible TV, a
commercially available HDMI connector (MHL
adapter) compatible with RCP is required.
Some applications may not support remote control
operations.
To check operations by TV remote control, drag the
status bar downwards
[Remote control usage].
External device connection
u
Tap [MHL connected]
u
182

Advertisement

Table of Contents
loading

Table of Contents