Using "
かざしてリンク対応サービ
(Kazashite-Link compatible
ス
service)"
From the Home screen,
1
u
[Settings]
[NFC/Osaifu-Keitai settings]
2
"Reader/Writer, P2P"
NFC Reader/Writer, P2P function is
・
enabled, and
bar.
Hold the
3
with the NFC module or a smart
poster.
u
[More...].
u
u
[OK].
appears in the status
mark over a device
Notes on holding over the
device
Please note the following when holding the
terminal over an IC card reader or NFC
module equipped device.
Mark
Bring the
・
do not hit it strongly.
Hold the
・
center horizontally. If scanning fails even with
it held in front of the center of the scanner,
slightly lift up the terminal, or move it
backwards/forwards or to the left/right.
If there are metal objects between
・
and the other device, scanning may fail.
Putting the terminal into a case or cover may
affect communication. In that case, remove
the case or cover.
mark
mark close to the device slowly,
mark over the device at the
mark
101
Apps