Table of Contents
Advertisement
Windows tethering Display the description about
Windows tethering.
To connect by Windows
tethering, set the following
beforehand.
･
･
･
DUALSHOCK
3
Use a commercially available
™
wireless controller
USB host cable to connect
DUALSHOCK
controller to the terminal.
Start MirrorLink
Set to allow a device
™
compatible with MirrorLink to
operate the terminal using
microUSB cable.
Copyright protected data
cannot be displayed.
USB Connectivity
P.178
* Compatible with Wi-Fi CERTIFIED Miracast
Depending on usage environment, image or sound
may be interrupted or stopped.
Covering around the Wi-Fi/Bluetooth antenna with
your hand may affect the quality of
communications.
Turn on Bluetooth function of
the terminal and the PC
(P.173).
Set security of Portable Wi-Fi
hotspot to "WPA2 PSK"
(P.149).
Pair the terminal and a PC
whose OS is Windows 8.1 or
later via Bluetooth (P.174).
3 wireless
™
™
Airplane mode
In this mode, the functions of using radio
wave transmissions such as calling, accessing
to the Internet (including sending/receiving
mails), etc. are disabled.
From the Home screen,
1
u
[Settings]
Mark [Airplane mode].
2
When Airplane mode is on,
･
on the status bar.
❖ Information
Alternatively, press and hold
･
Tap [Airplane mode] to set Airplane mode to on/off.
Even if Airplane mode is on, Wi-Fi, Bluetooth function
･
and NFC Reader/Writer, P2P function can be turned
on. Be careful not to use these functions in a place
where the use is prohibited such as in a airplane or
hospital.
u
[More...].
appears
P
for over a second
Settings
u
146
Advertisement
Table of Contents
