Applications; Plumbing Requirements - Cornelius QUEST ELITE 4000 Installation Manual

This appliance is intended to be used in household and similar applications such as the following:
• Staff kitchen areas in shops, offices and other working environments.
• Farm houses and by clients in hotels, motels and other residential type environments
• Bed and breakfast type environments
• Catering and similar non-retail applications
P R
LUMBING EQUIREMENTS
This dispenser must be connected to a COLD WATER system with operating pressure between 30psi minimum
and 60 psi maximum (206.8 kilopscals and 413.7 kilopscals). This water source must be capable of producing a
minimum flow rate of 3 fluid ounces (88.7 milliliters) per second. A shut off valve should be installed in the line
before the dispenser. Install a regulator in the line when pressure is greater than 100 psi (690 kPa) to reduce it to
50 psi (345 kPa). The regulator is also necessary if the water source has pressure fluxuations. The main water inlet
is a 3/8" (9.52 mm) MFL connection (Figure 4).
!
WARNING:
This equipment must be installed to comply with the International Plumbing Code of the International Code Council
and the Food Code Manual of the Food and Drug Administration (FDA). For models installed outside the U.S.A., you
must comply with the applicable Plumbing/Sanitation Code for your area.
Failure to comply could result in serious injury, death or damage to the equipment.
© 2010-2016, Cornelius Inc.

APPLICATIONS

Water
Connection
Figure 4. Plumbing Connection
- 5 -
Quest Elite 4000 Installation Manual
Publication Number: 620048956INS