Manual Adjustment Using Perforated Plates - Invacare Dragon User Manual

Invacare® Dragon
Depending on the side, the screw is accessible from
the front or the rear.
• 8 mm Allen key
1. Loosen screw (1).
2. Adjust armrest to required position.
3. Re-tighten screw.
4. Repeat this procedure for the second armrest.
26

4.3 Manual adjustment using perforated plates

There are three perforated plates underneath the seat
for adjusting the seat angle and the seat height. These
perforated plates in connection with the adjustable rear
holding plates result in a multitude of different setting
possibilities.
The adjustment range of the seat height is 42.5 cm to 50
cm. The adjustment range of the seat angle is 22°. Note:
The higher the seat setting, the smaller the adjustment
range of the seat angle!
• 5 mm Allen key
• 6 mm Allen key
• 13 mm wrench
• Torque wrench
• Thread locking adhesive such as Loctite
medium-hard
The picture above shows the position of the perforated
plates (1) and the holding plate fixing screws (2) for adjusting
the seat height and seat angle.
1442477-R