Labels On Product - Invacare Dragon User Manual

CAUTION!
Risk of injuries, and damage to the mobility
device, if unapproved backrests are used
A retrofitted backrest which is not approved by
Invacare for use with this mobility device may
overload the backrest tube and thus increase the
risk of injuries and of damage to the mobility
device.
– Please contact your Invacare specialist provider
who will perform risk analyses, calculations,
stability checks etc. to ensure that the backrest
can be used safely.
CE marking of the mobility device
– The conformity assessment/CE marking was
carried out in accordance with Directive 93/42
EEC and only applies to the complete product.
– The CE marking is invalidated if components or
accessories are replaced or added that have
not been approved for this product by Invacare.
– In this case, the company that adds or replaces
the components or accessories is responsible
for the conformity assessment/CE marking or
for registering the mobility device as a special
design and for the relevant documentation.
1442477-R
Important information about maintenance work
tools
– Some maintenance work which is described in
this manual and can be carried out by the user
without problems require the correct tools for
proper work. If you do not have the correct
tool available we do not recommend that you
try to carry out the relevant work. In this case,
we urgently recommend that you contact an
authorized specialist workshop.

2.7 Labels on product

Safety
19