Table of Contents
Advertisement
ppf-675-eco-manual-uk-253120913-b.book Seite 27 Mittwoch, 30. September 2009 12:58 12
10 Settings
Cursor Navigation 1
Notice
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters. Press STOP to
close the menu and return to the starting mode.
Entering the Date and Time
1 Press OK, 91 and OK.
2 Enter the time, e.g. 14 00 for 2 pm.
3 Enter the date (two digits for each field), for example
08 06 27 for June 8th, 2027.
4 Confirm with OK.
Time and Date After a Short Power Failure
Notice
Time and Date After a Short Power
Failure
You must check the time and date af ter a short
power failure. Confirm with OK.
Selecting the Language
1 Press OK, 92 and OK.
2 Use [ to select the desired display language.
3 Confirm with OK.
Selecting the Country
Setting the Country Correctly
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct telep hone
cable for the country. Consult your retailer.
Reset When Setting the Country
CAUTION!
Settings will be Deleted!
When you select a new country, all settings are
reset to the factory defaults for that country.
Saved data remains intact. Check the number
entered for the header.
1 Press OK, 93 and OK.
2 Use [ to select the country in which you are operat-
ing the device.
3 Confirm with OK.
4 Using [ select SURE: YES .
5 Confirm with OK.
Settings · Entering the Date and Time
Entering Number
Page Header
Your name and number are added together w ith date, time
and page number at the top edge of each fax transmission
(= header).
1 Press OK, 94 and OK.
2 Enter your number. Using # or * you can enter a
plus sign.
3 Confirm with OK.
Entering Your Name
1 Press OK, 95 and OK.
2 Enter your name. You can enter characters usi ng the
numeric keys (see button labe ls). Enter special charac-
ters using 0. Press the respective key several times
until the desired character or special character appears
on the display.
3 Confirm using OK.
Setting the Contrast
Setting the Contrast
For copying and printing of fax messages, you can select
different contrast levels.
1 Press OK, 44 and OK.
2 Using [, select the desired contrast:
CONTR.:LIGHT —For brighter copies and fax trans-
mission
CONTR.:NEUTRAL —For all types of or iginals (for
example white text on black background or documents
with coloured background)
CONTR.:OPTIMISED (Factory sett ings)—Opti-
mized adaptation for text and photo printing
CONTR.:DARK —For darker copies and fax transmis-
sion (for example documents with faint printing)
3 Confirm with OK.
Modifying the Basic Settings
Notice
Modifying the Basic Settings
The changed settings are stored as new default
settings. If you select a special f unction for a
one-time process, take care to restore the default
settings or factory settings after that.
EN
27
Advertisement
Table of Contents
