Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITOROND 100 Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
•
• • •
• •
• •
•
•
• •
• •
•
• •
• •
• • •
• • •
• • •
• •
• • •
• •
•
Commissioning steps
Inspection steps
Maintenance steps
1. Filling the system...........................................................
2. Commissioning the system...........................................
3. Shutting down the system
4. Closing the Vitoair draught stabiliser (if installed)...... 10
5. Opening the boiler door, extracting and cleaning the
turbulators....................................................................... 10
6. Cleaning the heating surface, flue outlet and flue....... 12
7. Checking all gaskets and packing cords on the flue
gas side
8. Checking gaskets and thermal insulation sections.... 12
9. Inserting the turbulators and fitting the boiler door.... 12
10. Checking the firm seating of electrical plug-in
connections and cable grommets
11. Checking the thermal insulation
12. Checking connections on the heating water and DHW
side and the sensor well for leaks
13. Checking the function of the safety equipment
14. Checking the expansion vessel and system pressure 13
15. Checking the mixer for ease of operation and
tightness.......................................................................... 14
16. Checking the Vitoair draught stabiliser (if installed)... 14
17. Adjusting the burner...................................................... 14
18. Operating and service documents................................ 15

Commissioning, inspection, maintenance

Page
8
9
7