Omron CJ1W-DRM21 Operation Manual page 133

Note You cannot use Holding Area H512 and its subsequent holding areas, or EM Area Bank D and its subse-
quent banks.
Slave User-set Allocations Setup Table Setting Results
Code
16#0000
16#1101
16#1103
16#110C
16#1104
16#2201
16#2211
16#2606
Precautions for Safe Use
Make sure the CPU Unit is in PROGRAM mode and the Unit has stopped slave communications
before you set these values.
CJ-series DeviceNet Units Operation Manual for NJ-series CPU Unit(W497)
Description
Completed normally
No area
Address range specification error
Parameter error
Address range overflow
Wrong operating mode
Unit busy
Cannot execute service
3 Data Exchange with the CPU Unit
Details
---
Incorrect area setting.
The first word is outside the setting range.
• The OUT 1 or IN 1 area size exceeds 200
bytes.
• The OUT 1 and IN 1 area sizes are 0.
• Neither the OUT 1 area nor IN 1 area is set for
allocation.
The allocated area exceeds the valid word
range.
The CPU Unit is not in PROGRAM mode.
Service cannot be executed because the Unit is
busy.
The Unit slave communications are not dis-
abled.
3
3-57