Network Configuration; Introduction; Specification; Self-Diagnostic Test - Olivetti d-Color MF1600 plus Network Manual

N
ETWORK CONFIGURATION
I
NTRODUCTION
Your machine incorporates a fast 100BASE-TX/10BASE-T network interface. This guide
explains the functionality of the built in network interface. Access for interconnection and
producing self-diagnostic test and configuration printouts is provided via an interface panel
located at the rear of the machine.
This network interface supports IEEE802.2, IEEE802.3, Ethernet-II and SNAP, and can
detect those frame types automatically. The network interface also supports TCP/IP
protocols.
This guide details the network interface specification and several software utilities.
NOTE
Not all utilities, features or protocols are supported by every operating
system. Please check with your User's Guide and support website for latest
information.
S
PECIFICATION
ITEM
Frame Types
Network Interface
Network Protocols
Functions
S -
ELF DIAGNOSTIC TEST
With the machine power switched on, press the TEST button located on the network
interface panel (at the rear of the machine) for more than three seconds and then release.
The self-diagnostic test results and configuration settings are printed.
On the first page of the Network Information that is printed out, under the heading "General
Information" the MAC or Ethernet Address is given. For example:
MAC Address
The Ethernet address is therefore 00:80:87:D4:FA:00

SPECIFICATION

IEEE 802.2
IEEE 802.3
Ethernet-II, SNAP, AUTO
100BASE-TX
10BASE-T
TCP/IP:
Network layer
Session layer
Application layer LPR, HTTP, BOOTP, DHCP, SNMP, DNS.
Self-diagnostic test printing
Monitoring and configuration by Web browser
00:80:87:D4:FA:00
Network configuration > 5
ARP
TCP, UDP