Others Menu - Sony HVR-M10C Service Manual

Operating the Menus

OTHERS menu

Icon/Menu Submenu
OTHERS CLOCK SET
(page 33)
WORLD TIME
LANGUAGE
BEEP
DATA CODE
(page 27)
LETTER SIZE
REMAINING
52
Chapter 4 Adjusting and Setting Through Menus
Setting
1 Press the f/F buttons to set the year, then press the EXEC button.
CLOCK SET
2005 JAN 1 12 : 00
Y M D AM
[ MENU ] : CANCEL
2 Press the f/F buttons to set the month, day, hour and minute in the same way as step 1,
then press the EXEC button.
Notes
• 12:00 AM stands for midnight and 12:00 PM stands for noon when [50i/60i SEL] is set to
60i.
• If you do not use the unit for three months or more, the built-in rechargeable battery will be
completely discharged, and the settings of the day and the time may be cleared from the
memory. In this case, charge the built-in rechargeable battery and set the clock again.
(p. 64)
You can adjust the time difference when using your unit abroad. Set the time difference by
pressing the f/F buttons. The clock will be adjusted in accordance with the time difference.
If you set the time difference to 0, the clock returns to the originally set time.
You can select or change the language used for on-screen display.
For HVR-M10U:
You can select from English, Simplified English or Canadian-French.
For HVR-M10N:
You can select from English, Simplified English, Latin American Spanish, Brazilian-
Portuguese, Traditional-Chinese or Korean.
For HVR-M10E:
You can select from German, Greek, English, Simplified English, Spanish, French,
Italian, Dutch, Portuguese, Russian, Arabic or Persian.
For HVR-M10P:
You can select from English, Simplified English, Simplified-Chinese or Traditional-
Chinese.
Selects whether or not the unit beeps.
ON : Enables the beep.
OFF : Disables the beep.
DATE/CAM : Displays the date/time or camera data when you press the DATA CODE
button of the Remote Commander.
DATE : Displays the date/time when you press the DATA CODE button of the Remote
Commander.
Changes the font size of the menu line at the cursor.
NORMAL : Normal size
2× : Double height size
AUTO : The remaining tape time is displayed for 8 seconds under the following
conditions.
– If the remaining tape time is determined when you turn on power while a
cassette is loaded in the unit.
– When you press the B PLAY button or DISPLAY/BATT INFO button.
ON : Always displays the remaining tape time.