Sony HVR-M10C Service Manual page 267

HDV formatted tape
Button
Operation speed
× 1/10
One-tenth of normal speed
× 1/3
One-fifth of normal speed
× 1
Playback at normal speed
× 2
Playback at normal speed
FRAME
Frame-by-frame forward scanning
c/C
/
8× speed
* The output will be the same as that of ×1.
: Play at normal speed.
: A search simple image is output. (Rough image)
—: No playback takes place.
To change playback direction
Press the FRAME c/C buttons during normal
playback or when playing at various speeds. To play
back in the forward direction, press the C button; in
the backward direction, press the c button.
Notes
• When the command mode of a Sony device / remote
commander is set to VTR4;
– if you press the ×1/3 button on the supplied Remote
Commander while pointing it toward a Sony device
other than this unit, the playback speed may turn to
1/5 of normal speed.
– when you playback a tape in the DVCAM/DV
format and press the ×1/5 button on a remote
commander while pointing it toward this unit, the
playback speed will turn to 1/3 of normal speed.
• If the unit keeps playing at 1/10 of normal speed in
forward or reverse for more than 1 minute, the unit
will begin to play back forward at normal speed.
• The sound of a tape is not output while being played
at various speeds.
Panel/analog output
Reverse
Forward
direction
direction
—*
—*
—*
—*
—*
Chapter 2 Playback and Recording
i.LINK output
Forward Reverse
direction direction
— —*
— —*
—* —*
— —*
29