Securing The Cables In The Moving Head (Upper Part) - ELNA eXpressive 970 Service Manual

Securing the Cables in the Moving Head (Upper Part)

Nylon clip
Cable guides
Right LED cables
and other cables
Nylon clip
Cable guide (black)
Cable guide (black)
Left LED cables
Setscrew
Cable guide (black)
Cable guides (white)
Cord guide plate
Cable guides (white)
Cables A
Secure the cables with the Nylon clip and cable
guides to prevent the cables from interfering with
parts in the moving head.
Attaching the cable guide (black)
Bundle the cables with the Nylon clip and attach the
cable guide (black) to the Nylon clip with the setscrew.
* Attach the cable guides (white) under the cord guide
plate.
Bending the cable guide (black)
Bend the cable guide (black) in line with the left edge
of the cord guide plate (upper part) and level with the
cables A, as illustrated.
* The cables should be under the cable guide (black)
when the moving head moves.
Bending the cable guides (white)
Bend the 3 cable guides (white) upright on the edge
of the cord guide plate (lower part).
* The cables should be inside the cable guides (white)
when the moving head moves.
64