Replacing The X-Carriage Belt - ELNA eXpressive 970 Service Manual

Setscrews (A)
Setscrews (C)
X-belt holder
Hoop supporter
X-belt pulley shaft
Drive pulley shaft unit

Replacing the X-carriage Belt

X-belt pulley
Setscrew (B)
E-ring
Setscrews (D)
1. Remove the spool stand, static head right cover and
left cover (see pages 4 – 6).
2. Loosen the two setscrews (A) and remove the
X-carriage cover.
3. Shift the hoop supporter to the extreme left end.
Remove the two setscrews (C) and the X-belt holder.
4. Loosen the two setscrews (B) and shift the X-belt
pulley in the direction of the arrow.
5. Remove the E-ring and pull the X-belt pulley shaft to
remove the X-belt pulley.
6. Remove the two setscrews (D) and drive pulley shaft
unit.
7. Replace the X-carriage belt.
8. Attach the parts removed in steps 3 – 6.
9. Adjust the X-carriage belt tension (see the previous
page).
10. Attach the parts removed in steps 1 – 2.
51