Replacing The Take-Up Lever Cam Roller - ELNA eXpressive 970 Service Manual

Replacing the Take-up Lever Cam Roller

Drive cover
Thread take-up lever spring
Setscrew
Thread take-up lever shaft Thread take-up
Thread take-up
lever shaft
Cam roller
shaft
Setscrews
lever unit
Washer
Cam roller
Setscrew
To remove:
1. Remove spool stand, head cover (right), right cover, left
cover and thread tension panel.
2. Remove the three setscrews and drive cover.
3. Remove the thread take-up lever spring with pliers.
4. Loosen the setscrew. Remove the thread take-up lever
shaft, thread take-up lever unit and washer.
5. Loosen the setscrew. Remove the cam roller shaft and
cam roller.
To attach:
6. Reverse the procedure above.
When attaching the thread take-up lever shaft, tighten
the screw while pressing the thread take-up lever shaft
lightly.
15