Axis 5600 Plus User Manual page 94

Management and Configuration
the Status file
Performing Resets
94
Downloaded from www.Manualslib.com
Example:
> telnet npserver
Trying 192.36.253.96...
Connected to npserver.
Escape character is '^]'.
Axis Network Print Server TELNET Print Server v6.30 Dec 16 2000
Axis Network Print Server network login: root
Password: pass
Axis Network Print Server TELNET Print Server v6.30 Dec 16 2000
Root> account
Current account file:
JOB
1
2
3
4
5
6
Root>
Viewing
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name>
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. View the status file by typing:
status
Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server's parameters to its
default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name>
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
manuals search engine
(not visible)
USER PROT
Thomas FTP
Joe LPT
RICHARD PSERVER
MacUser APPLE
LSLM_user NetBIOS
patrick PROS
Typical Telnet session to view the Account File
or
telnet <IP address>
or
telnet <IP address>
AXIS 5400+ / AXIS 5600+ User's Manual
LPR S BYTES ETIME OTIME
pr2 C 1885 2 0
pr1 C 23074 4 0
pr2 C 43044 5 0
pr1 C 6717 2 0
pr2 C 36995 3 0
pr5 P 83208 9 0
in a DOS window
and
root pass
in a DOS window
and
root pass
.)
.)