Axis 5600 Plus User Manual page 41

AXIS 5400+ / AXIS 5600+ User's Manual
Downloaded from www.Manualslib.com
6. Write a text file containing the parameters you want to set:
BINARY_TYPE_1.
INT_ADDR.
ATYPE_1.
Note:
Parameters that you do not want to set should be excluded from the text file. Refer to the
Parameter list in this manual for information about which values that are valid for each
parameter.
7. Print the text file. The settings will be stored in the print server.
8. Open the Chooser and select the printer port you wish to use for printing
documents.
9. Close the Chooser.
Note:
The _CFG port disappears 60 minutes after the AXIS 5400+/AXIS 5600+ has been powered
on. If you want it to reappear, you must restart your print server.
manuals search engine
Adding Printers in Macintosh
:BCP
:192.168.3.191
:EPSONLQ2
41