Axis 5600 Plus User Manual page 91

Editing the config file
AXIS 5400+ / AXIS 5600+ User's Manual
Downloaded from www.Manualslib.com
can change the Axis Network Print Server parameter settings using the
File Transport Protocol (FTP).
Follow the instructions below to edit the config file using FTP:
1. Log in to the Axis Network Print Server by typing:
ftp <host name>
and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. Download the config file to your host by typing:
get config
4. Edit the file using your preferred text editor.
5. Save the config file to the Axis Network Print Server by typing:
put config CONFIG
Notes:
• It is important that the destination file is specified in capital letters. Otherwise the edits
are temporary and will be lost once the Axis Network Print Server has been powered off.
• To edit the config file from a Macintosh you will need FTP support such as MacTCP, Fetch
or Anarchie. The procedure for editing the file is the same as described above.
The example on the next page describes how to upload and download the
config file using FTP from a DOS window.
Example:
> ftp npserver
manuals search engine
Management and Configuration
or in a DOS window (Windows
ftp <IP address>
and .)
root pass
91