Axis 5600 Plus User Manual page 128

Troubleshooting
IP Address Check with
UNIX/Linux and
128
Downloaded from www.Manualslib.com
By sending a data packet to a specific IP address and waiting for a reply,
Ping
Ping can determine whether that IP address is accessible. Ping can also
help you to determine IP address conflicts with your AXIS 5400+/AXIS
5600+ and troubleshoot TCP/IP problems on the network. Follow the
instructions below to diagnose your problem.
Windows: Open a Command Prompt and enter the following commands:
Syntax
ping <IP address>
The host will return
indicates that the address has been set and that communication is
established
Open a Terminal and enter the following commands:
Mac OS X
Syntax
ping <IP address>
The host will return
the address has been set and that communication is established.
Replies: Subsequent replies will provide an explanation of the cause of the problem.
Replies from DOS can be interpreted as defined in the table below (for
UNIX/Linux replies please refer to the UNIX/Linux chapter of this manual):
Ping Reply
bytes = 32 time = 2 ms......
- or something similar
destination host
unreachable
request timed out
no response from
ping command
manuals search engine
Example
ping 192.168.3.191
, or a similar message. This
reply from 192.168.3.191
Example
ping 192.168.3.191
, or a similar message. This indicates that
psname is alive
Interpretation and recommendation
Axis Network Print Server connected
The AXIS 5400+/AXIS 5600+ is re-
sponding correctly. There are probably
no conflicts with the IP address - dis-
connect the AXIS 5400+/AXIS 5600+
and ping again to verify.
The AXIS 5400+/AXIS 5600+ is not ac-
cessible. Check your network settings.
The IP address is not in use. You are
either pinging the wrong IP address or
your AXIS 5400+/AXIS 5600+ does not
have the correct IP address.
The AXIS 5400+/AXIS 5600+ is not ac-
cessible. Check your network settings.
AXIS 5400+ / AXIS 5600+ User's Manual
Axis Network Print Server
disconnected
The IP address is already in use and
cannot be used again. You must obtain
a new IP address for your AXIS
5400+/AXIS 5600+.
—
This IP address is not used by anyone
and is available for use for your AXIS
5400+/AXIS 5600+. Set the IP address
again, power on the AXIS 5400+/AXIS
5600+ and then try accessing the unit.
—