Axis 5600 Plus User Manual page 17

Set the IP Address
UNIX/Linux and Mac
AXIS 5400+ / AXIS 5600+ User's Manual
Downloaded from www.Manualslib.com
Note:
• When you execute the ping command for the first time, you will experience a significantly
longer response time than is usual
• The ability to set the IP address with ARP and PING will only be enabled the first 10
minutes after restarting the print server.
• By using the arp -d command, the static entry in the arp table is removed from the
host's cache memory.
1. Open a Terminal and enter the following commands:
using ARP in
Syntax
arp -s <IP address> <Ethernet address>
OS X
ping <IP address>
2. The host will return
that the address has been set and that communication is established.
3. Log in to the print server's Web pages (see Using a Web Browser for Print
Server Management, on page 83), select Admin | Network Settings |
Detailed View | TCP/IP Network Detailed View | TCP/IP Network Detailed View | TCP/IP Network Detailed View | TCP/IP Network and define Default Router
Mask. Make sure you first set DHCP, Auto-IP, BOOTP Mask Mask Mask
You have now successfully set the IP address of the print server. Continue
to "Making Network Printers available for printing on your PC" on page
18.
Notes:
• If the host name has not been mapped to an IP address, simply replace the host name entry
with the IP address.
• The ARP command varies between different UNIX/Linux systems. Some BSD type systems
expect the host name and node address in reverse order. Furthermore IBM AIX systems will
require the additional argument ether.
• When you execute the ping command for the first time, you may experience a
significantly longer response time than is usual
• The ability to set the IP address with ARP and PING will only be enabled the first 10
minutes after restarting the print server.
See Using AXIS ThinWizard for Print Server Management, on page 88 for
instructions on setting IP addresses with AXIS ThinWizard.
manuals search engine
.
Example
arp -s 192.168.3.191 00:40:8c:10:00:86
ping 192.168.3.191
, or a similar message. This indicates
psname is alive
Admin | Network Settings |
Admin | Network Settings | Admin | Network Settings |
Default Router and Subnet Default Router Default Router
DHCP, Auto-IP, BOOTP and RARP DHCP, Auto-IP, BOOTP DHCP, Auto-IP, BOOTP
.
Basic Installation
Subnet Subnet Subnet
RARP to No! RARP RARP No! No! No!
17