Pt Programming; Programming Instructions - Panasonic KX-TDA100D Programming Manual

2.1.1 Programming Instructions

2.1 PT Programming

2.1.1 Programming Instructions
Required Telephone/Extension
PBX settings can be customised through system programming by using a proprietary telephone (PT) with a
multiline display, such as the KX-NT343 or KX-DT346. To access system programming, the Class of Service
(COS) assigned to the PT's extension must be programmed to allow system programming, or the PT must be
connected to the lowest-numbered port on the card installed in the lowest-numbered slot.
Only one system programming session can be performed at a time. This means that only one user can access
system programming at a time, whether through a PT or PC.
For a list of characters that can be entered during system programming, see Section 1.1.3 Entering
Characters.
Buttons and Functions
KX-NT300/KX-DT300
SHIFT
PAUSE
16 PT Programming Manual
Fixed Buttons
KX-NT136/KX-T7600
SHIFT
PAUSE
HOLD
AUTO ANS
MUTE
WWW.ERTEBATGROUP.COM
MESSAGE
WWW.ERTEBATGROUP.COM
Function
PREVIOUS
NEXT
(Page up)
(Page down)
ENTER
Back to Previous Menu
(CANCEL)
SHIFT
PROGRAM
END
SELECT