Canon imageRUNNER ADVANCE C255 Series Service Manual page 848

COPIER (Service mode for copier) > COUNTER (Counter mode) > MISC
T-SPLY-K 1
Detail
Use Case
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
ALLPW-ON 1
Detail
Use Case
Unit
Default Value
Amount of Change per
Unit
HDD-ON 1
Detail
Use Case
Unit
Default Value
Amount of Change per
Unit
ST-NDL 1
Detail
Use Case
Display/Adj/Set Range
Unit
Amount of Change per
Unit
ENT-PTH 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Amount of Change per
Unit
SUC-A-Y 2
SUC-A-M 2
SUC-A-C 2
SUC-A-K 2
APW-TIME 2
CPW-TIME 2
Bk toner supply counter
Number of Bk color toner supply blocks.
Counted for every one rotation of Toner Stirring Screw.
When checking the usage status of toner
0 to 99999999
block
0
1
Number of DCON PCB power-on times
Number of power-on times (Non-all-night Power Unit).
To count up when power is turned ON (Non-all-night Power Unit).
When checking the usage status of the product
time
0
1
Number of HDD start-up times
To count up at HDD start-up.
When checking the usage status of the product
time
0
1
Staple needle counter: Fin-C1
To count the use of the staple needle.
When checking the usage status of the staple needle.
0 to 99999999
time
1
Finisher feed path counter
Paper pass counter on the Finisher feed path
- When checking the number of fed sheets
- When replacing the Finisher
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
- Be sure to clear the counter value when replacing the Finisher.
- Do not clear the counter value when replacing the Buffer Path.
0 to 99999999
1
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
837
8. Service Mode