1203 - Dci Tenant Group - NEC 28i System Manual

Description
This program is not used with 28i/124i Commonized, 124i Enhanced,
Use Program 1203 - DCI Tenant Group to assign the PMS DCI soft-
ware port (1-144, 145-288) to a Tenant Group (1-4). Be sure the PMS
DCI is in the same Tenant Group as the hotel mode telephones and the
entry you make in Program 2802. Refer to the "Order" option in
Program 0005 if you need to know the software port number of the
PMS DCI port.
Conditions
None
Default Setting
All DCI software ports are in Tenant Group 1.
Feature Cross Reference
PMS Integration
Telephone Programming Instructions
To enter data for Program 1203 (DCI Tenant Group):
1. Enter the programming mode.
2. 1203 + HOLD.
DCI No?
3. Enter the DCI software port you want to program + HOLD.
DCI Module software ports are 1-144. 3-DCI software ports
are 145-288.
DCI_nnn:
4. For the DCI software port selected, enter the Tenant Group (1-4)
+ HOLD
DCI No?
5. Repeat from step 3 to program another DCI software port.
OR
HOLD to begin sort.
Sorting...
Sort Complete!
6. HOLD to exit.

1203 - DCI Tenant Group

or 704i software.
3-33