NEC 28i System Manual page 121

0502 - Extension Numbers and Names
Description
Use Program 0502 - Extension Numbers and Names to set the exten-
sion numbers and names. This allows you to have room numbers match
the room telephones' extension numbers. Extension numbers can be
either three or four digits long. Extension names can be up to ten char-
acters long. Use the following chart when programming names:
Use this key . . .
DSS1
DSS2
DSS3
DSS4
DSS5
DSS6
DSS7
DSS8
DSS9
DSS10
CHECK
CLEAR
Dialpad digits 0-9, #
and *.
Keys for Entering Names
When you want to . . .
Enter characters A-D. After selecting your entry, press
check to have system accept it.
Enter characters E-H. After selecting your entry, press
check to have system accept it.
Enter characters I-L. After selecting your entry, press check
to have system accept it.
Enter characters M-P. After selecting your entry, press
check to have system accept it.
Enter characters Q-T. After selecting your entry, press
check to have system accept it.
Enter characters U-Z. After selecting your entry, press
check to have system accept it.
Enter a hyphen (-). After selecting your entry, press check
to have system accept it.
Enter a blank space. After selecting your entry, press check
to have system accept it.
Enter extended ASCII characters. Press repeatedly to scroll
through the list. After selecting your entry, press check to
have system accept it.
Enter punctuation marks. Press repeatedly to scroll through
the list. After selecting your entry, press check to have
system accept it.
Save text entry as part of name after you select it. You need
to press CHECK after selecting characters from DSS keys
1-10. You don't need to press CHECK after dialing a dial
pad digit (0-9, # or *).
Clear the text entry if you want to start over.
Enter numbers, # and * as part of the name. You don't need
to press CHECK after entering these characters.
4-19