2804 - Pms Restriction Level Conversion Table - NEC 28i System Manual

2804 - PMS Restriction Level Conversion Table

Description
Use Program 2804 - PMS Restriction Level Conversion Table to set
up the PMS Toll Restriction Conversion Table. This table correlates the
four Station Restriction Codes (0-3) to Toll Restriction Levels (1-15)
assigned in Program 0701. This allows the supervisor (by dialing
Service Code 0514 Item 56 from their phone) or the PMS system to
change the Toll Restriction level of any checked-in room telephone.
Keep in mind that Toll Restriction Conversion permanently overrides
the Toll Restriction (When Checked-in) setting in Program 1022.
Conditions
None
Default Setting
124i EXCPRU: All Station Restrictions Codes use Toll Restriction
384i:
Station Restriction Code 0 uses Toll Restriction Level 10
Station Restriction Code 1 uses Toll Restriction Level 11
Station Restriction Code 2 uses Toll Restriction Level 12
Station Restriction Code 3 uses Toll Restriction Level 13
Feature Cross Reference
Toll Restriction Conversion
Telephone Programming Instructions
To enter data for Program 2804 (PMS Restriction Level
Conversion Table):
1. Enter the programming mode.
2. 2804 + HOLD.
Level No (0-3)?
3. Select the Station Restriction Code you want to program (0-3) +
HOLD
CLASS:n
The previously programmed value displays.
4. Enter the Toll Restriction Level (1-15) you want to assign to the
Station Restriction Code selected in step 3.
5. HOLD
Level No (0-3)?
6. Repeat from step 3 to select another Station Restriction Code.
OR
HOLD to exit.
Level 8
3-41