Factory Reset - Fujitsu PRIMERGY TX100 S2 Core Edition Operating Manual

5.4.2

Factory reset

Ê Establish a VNC connection as described in
using a VNC connection" on page
Figure 21: Maintenance and Recovery Manager user interface - Factory reset
Ê Ensure that the Maintenance & Recovery DVD is in your DVD drive!
Ê Select Create RAID and Reinstall from the Recovery section in the
Maintenance and Recovery Manager menu.
V
CAUTION!
All user data will be lost when resetting your server. The existing
RAID configuration including all partitions on all hard disk
drives will be destroyed and replaced.
Ensure to backup your data before proceeding. If the operating
system is no longer accessible, use the VNC File Transfer
functionality to backup your files. The files will be transferred using the
existing VNC connection.
For additional information on VNC File Transfer, please refer to
section
page 65.
TX100 S2 Core Edition
"Transfering the PrimeCollect file to your client computer" on
Operating Manual
Installation and operation
section "Accessing the server
59.
71